Mercedes-Benz CLS Recall Information
NEWS: Mercedes-Benz is recalling certain 2015 CLS 400 and CLS 400 4matic, 2012-2015 CLS 550 and CLS 550 4matic, 2012-2013 CLS 63, 2014 CLS 63, and 2014-2015 CLS 63P vehicles; EXTERIOR LIGHTING
MARCH 2015 -- Mercedes-Benz USA, LLC. (MBUSA) is recalling certain model year 2015 CLS 400 and CLS 400 4matic, 2012-2015 CLS 550 and CLS 550 4matic, 2012-2013 CLS 63, 2014 CLS 63, and 2014-2015 CLS 63P. The affected vehicles have LED tail lights that may not light on the sides, reducing the rear side visibility of the vehicle. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 108, "Lamps, Reflective Devices, and Associated Equipment." Reduced rear side marker illumination may prevent other drivers from seeing the vehicle, increasing the risk of a crash. MBUSA will notify owners, and dealers will update the lighting controller software, free of charge. The manufacturer has not yet provided a notification schedule. MBUSA's number for this recall is 2015030005. Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
NEWS: Mercedes-Benz is recalling 147,000 vehicles, 2013-2105 Model Years: STRUCTURE
FEBRUARY 2015 -- Mercedes-Benz USA, LLC. (MBUSA) is recalling certain model year 2013-2015 E350 Sedan, E350 4Matic Sedan, E350 4Matic Station Wagon, E400 Hybrid Sedan, CLS 550 CGI, and CLS550 4Matic, 2013-2014 E550 4Matic Sedan, 2013 E63 Sedan, E63 Station Wagon and CLS63, 2014-2015 CLS63 4Matic, E63 4Matic Sedan, E63 4Matic Sedan "S", and E63 4Matic Station Wagon, 2015 CLS400, 2015 E400 Sedan, E400 4Matic Sedan and CLS400 4Matic and 2014 CLS63 "S". The affected vehicles have a rubber seal at the back of the engine bay that may temporarily stick to the hood when it is opened and then may fall into the engine bay when the hood is closed. If the rubber seal falls into the engine compartment, it may contact parts of the exhaust system, increasing the risk of a fire. MBUSA will notify owners, and dealers will attach four additional retaining clips to the rubber seal, free of charge. The recall is expected to begin by mid-March 2015. MBUSA's number for this recall is 2015020001. Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
MORE RECALL INFO:
NEWS: Mercedes-Benz is recalling certain 2012 CLS550 and CLS550 4Matic vehicles
NOVEMBER 2012 -- Mercedes-Benz is recalling certain model year 2012 CLS550 and CLS550 4Matic vehicles, manufactured December 01, 2011, through December 13, 2011. The bolts that hold the hood's secondary latch striker may have been insufficiently tightened. The reduced torque of the striker bolts might lead to a loosening of the bolts. If two of the four bolts securing the striker became loose, the secondary hood latch function would become ineffective. If this problem combines with a failure of the primary hood lock or if the hood is not properly closed, the hood could open while driving, increasing the risk of a vehicle crash. Mercedes-Benz will notify owners, and dealers will check and retighten the bolts as necessary. The recall campaign is expected to begin in December 2012. 12V-533
MORE RECALL INFO:
JULY 2008 -- Mercedes-Benz is recalling 404 MY 2006-2008 M-Class, R-Class, MY 2005-2009 SLK-Class, MY 2005-2008 C-Class, MY 2003-2004 and 2006-2008 CLK-Class, MY 2003-2008 E-Class, MY 2004 and 2008 CL-Class, MY 2008 CLS-Class, MY 2004 and 2007-2008 S-Class, MY 2003 G-Class, and MY 2003-2004, 2006 and 2009 SL-Class vehicles. A software calibration number (SCN) coding received on the affected vehicles during a recent workshop visit was incorrect. Depending on the model year and model affected, the results of an incorrect SCN coding can affect a number of vehicle safety and emission functions including the following types of functions: (1) the fuel gauge readings may be incorrect; (2) a stuck fuel-level sensor may not be displayed in the instrument cluster; (3) the OBD system may cause the check engine light to illuminate incorrectly; and, (4) the speedometer may be out of tolerance. In the event of a vehicle crash, the electrical fuel pump may not receive a crash signal that is required for the fuel pump to disconnect and prevent future fuel delivery as designed. Dealers will recode the SCN. The recall is expected to begin during August 2008. 08V303